PD2 Digital Video Transmitter

Palladium II Digital Video TX

The Palladium Series of digital video transmitters provides exceptional
video quality in high multipath environments. They are ideal for
use inside buildings, in urban areas, and other applications where
multipath would cause video tearing or breakup in analog signals.
All Palladium II series transmitters are programmable to support 3
bandwith modes:
Wideband DVB-T (6, 7, 8 MHz)
Narrow band (2.5MHz)
Ultra-narrow band: (1.25 MHz)
The new DVB-T wideband mode provides compatibility with other
manufacturer’s DVB-T compliant products. Palladium II Series is
also compatible with the existing Palladium product family when
configured in the Narrow band (2.5 MHz) mode.
Enhanced range performance is available with the narrow band
2.5MHz channel spacing that uses approximately 400 carries to
transmit video, two audio channels, and a data channel. In addition
the Ultra-narrow band mode 1.25 MHz provides the opportunity to
boost that range, with consideration of a lower video frame rate of
approximately 15 frames per second.

Features

• Power Output available 100 mW, 250mW, or 1 Watt
• Wideband DVB-T compliant: 6, 7, 8 MHz
• Narrow bandwidth 2.5 MHz wide channel
• Ultra Narrowband 1.25 MHz wide channel
• Full frame rate high resolution digital video
• Supports both NTSC & PAL formats
• MPEG-2 or MPEG-4 compression
• Two high fidelity audio channels
• AES 128 encryption, AES 256 optional
• Serial data channel 115.2 Kbaud max.

Palladium Digital Video TX

The Palladium Series of digital video transmitters provide exceptional video quality in high multipath environments. They are ideal for use inside buildings, in urban areas, and other applications where multipath would normally cause video tearing or breakup.

All Palladium Series transmitters are designed for 2.5 MHz channel spacing and use approximately 400 carriers to transmit video and two channels of voice and data. Transmitters may be located on adjacent channels without a guard band. AES encryption ensures users of secure communications.

The Palladium 100 is a small transmitter with a 100 mW RF power output. It’s ideal for concealments, on-body transmission systems, and in shorter range robotic and UAV applications. The package is only 5.5” x 2.5” x 0.75”. Power consumption is 7.5 Watts. All connections are conveniently located off the end of the unit. Many users will want to power this device with disposable batteries.

Digital Video TX/RX Kit

Palladium Digital Video TX/RX Kit

The Palladium Digital Transmitter and Receiver Kit includes everything you need to transmit and receive high-quality video using the most advanced digital technology. Simply connect your video source or camera to the transmitter input and follow the simple Quick Start instructions for connecting antennas and power.

This kit is ideal for use inside buildings, in urban areas, and in other applications where multipath would normally cause video tearing or breakup. Kit components include the Palladium 100 Transmitter, Palladium Receiver, two magnetic mount receiver antennas, a dipole transmitter antenna, batteries, cables, and
connectors.

The Palladium digital video transmitter provides exceptional video quality in high multipath environments. The transmitter and receiver are designed for spectrum-efficient 2.5 MHz channel spacing. Approximately 400 carriers are used to transmit video and two channels of voice and data. Palladium transmitters may be located on adjacent channels without a guard band. AES 128-bit encryption ensures users of secure communications.

Features

• Palladium COFDM Digital Technology
• Palladium Digital Receiver
• TX power output of 100 mW or 250 mW
• Two audio channels and one data channel
• Operating Frequency:
  L1 (1150 - 1400 MHz)
  L (1700 - 1850 MHz)
  S2 (2200 - 2300 MHz)
  S (2350 - 2500 MHz)
• AES 128 bit Encryption
• Optional 256 bit encryption
• Battery Pack
• Palladium Digital Receiver
• Optional 2 Magnetic Mount Antennas
  High Gain Collinear Antennas
• Dipole Antenna